Hobby laser engravers
Best laser engraver for beginners
For a first laser in a house, start with an enclosed Class 1 diode. Buy a CO2 or a fiber later, when you already know you need clear acrylic or bare metal.
Our picks at a glance
Ordered by the job a beginner is usually trying to do, not by a score. We did not run these machines.
| Machine | Best for | Class | Price checked | Price |
|---|---|---|---|---|
| xTool M2 10W | First enclosed machine | Class 1 | $499 (was $599) | Check price at xTool |
| Creality Falcon A1 10W | Lower price, wide bed | Class 1 | $439 (was $599) | Check price at Creality |
| xTool M2 20W | Thicker wood, still Class 1 | Class 1 | $899 (was $999) | Check price at xTool |
| Creality Falcon A1 Pro 20W | Camera and 20W, smaller bed | Class 1 | $899 basic kit | Check price at Creality |
How to choose a first laser
Wattage is the number ads shout. The class rating, the smoke path, and the material you actually want to make decide whether the machine belongs in the room.
Class 1, lid closed
A Class 1 machine keeps the beam inside during normal use. xTool’s M2 FAQ and Creality’s A1 Pro safety note both tell you not to run with covers off. Open-frame diode machines are Class 4 tools: glasses, a closed room, and no kids in the beam.
What you will actually make
Blue diodes engrave wood, leather, card, opaque acrylic, and painted metal. They do not cut clear acrylic. Bare stainless needs a 1064 nm infrared or fiber source. If tumblers are the whole plan, read the tumbler guide before you buy a gantry diode.
Smoke is not the beam
A lid that blocks light does not make wood smoke or acrylic fumes safe to breathe. Creality’s A1 Pro FAQ says to use an air purifier. Plan a duct to a window or a filter, plus a fire extinguisher, and never leave a job running alone.
People shopping a first laser are usually choosing between a cheap open frame and a box that costs more and does less theater. The box is the right default. A 10 watt blue diode inside a Class 1 enclosure will engrave gifts, cut thin wood, and stop the beam when the lid opens. It will not cut a clear acrylic sign, and it will not mark a bare stainless tumbler.
The four machines below are the ones we could price on a manufacturer store on November 19, 2026, with a published class rating and a published work area. Prices move, especially this week: xTool’s US store was advertising a Black Friday sale. Where a page showed a compare-at price, we wrote both numbers. This is a research note from specs and owner-report patterns, not a test we ran.
Pick 01
xTool M2 10W
Best for: A first enclosed laser in a spare room
$499. Black Friday price on xTool’s US store for the 10W standalone. The inkjet module is not included. The same page showed a compare-at price of $599. Price as of Nov 19, 2026; may change.
This is the machine we would point a beginner at first. The M2 support FAQ calls it a Class 1 device: during normal use the beam stays behind the cover, and opening the cover or removing the baseplate stops the laser. The 10W blue module is 445 nm. xTool’s published one-pass chart, at 100% power, cuts 3 mm basswood at 8 mm/s and 8 mm basswood at 2 mm/s. Black acrylic at 3 mm takes two passes. That is hobby cutting, not a sign shop.
The product page also sells a story about color printing and a 3W, 1064 nm infrared module. Neither is in the $499 standalone. The infrared module is what you would add later for stainless, copper, and aluminum. Until then, treat bare metal as out of scope. The page says the chassis can engrave cylinders from 0 to 100 mm without a riser base, which covers many mugs and smaller bottles if you add the RA3 Lite rotary ($259 when we checked, sold separately). Measure the cup. A full-size 40 oz tumbler is a different problem, covered in the tumbler guide.
Pros
- xTool classifies it as Class 1, with interlocks on the cover and the baseplate.
- Published work area is 426 × 320 mm with the 10W module, and the page says cylinders from 0 to 100 mm do not need a riser.
- Built-in air assist and an exhaust fan are part of the machine, and the cutting table for basswood and black acrylic is published.
Cons
- It cannot cut clear acrylic. The blue module is also a poor match for mirror-finished metal.
- The $499 configuration does not include the color inkjet, the 3W infrared module, or a rotary.
- 10W is the slow end of xTool’s own cutting chart: 8 mm basswood at 2 mm/s, and 3 mm black acrylic in two passes.
Who it is not for
Anyone who needs clear acrylic, deep metal marks, or a production tumbler business. The 10W module is also the slow one if you plan to cut a lot of 6 mm plywood.
- Laser
- 10W diode, 445 nm ± 15 nm
- Class
- Class 1, lid and baseplate interlocks
- Work area
- 426 × 320 mm (10W)
- Cut claim
- 8 mm basswood; 3 mm black acrylic in 2 passes
- Cylinders
- 0–100 mm without a riser, per xTool
- Software
- xTool Studio
Sources: xTool M2 product page; xTool M2 FAQ.
Pick 02
Creality Falcon A1 10W
Best for: A lower-priced Class 1 diode with a wide bed
$439. Creality Falcon’s US store listed the 10W machine at $439, with a compare-at price of $599. The page did not name that discount as a Black Friday sale. Price as of Nov 19, 2026; may change.
The Falcon A1 10W is the budget enclosed pick. On the Creality Falcon product page the spec block says Class 1 (FDA), wavelength 455 ± 15 nm, spot 0.06 × 0.08 mm, and an engraving area of 305 × 381 mm. That bed is shorter than the M2’s 426 mm length and deeper than the M2’s 320 mm. If your projects are wide boards rather than long signs, the shape may matter more than the wattage, which is the same 10W class.
The page also talks about a camera preview and an air-assist set. We are not going to promise those parts are in every carton this week, because the store was showing promotional kit language next to the machine price. Before you pay, read the “what’s included” list at checkout. Software support for LightBurn is a real difference from the M2, which stays in xTool Studio. LightBurn is a paid license; budget for it if you want that workflow.
Pros
- The product spec block lists Class 1 (FDA), a 455 ± 15 nm diode, and a 305 × 381 mm engraving area.
- The page lists LightBurn, LaserGRBL, and Falcon Design Space, so you are not locked to one cloud app.
- It was the lowest Class 1 price we could verify, sixty dollars under the M2 10W sale price.
Cons
- We could not find a single-pass cutting-thickness table on this product page, so we are not repeating a wood-thickness claim.
- No 1064 nm module is part of this listing. Painted metal is plausible for a blue diode; bare stainless is not.
- Creality’s own A1 Pro FAQ still suggests goggles even on a lidded machine. Read the manual before you treat “no goggles” marketing as a rule.
Who it is not for
People who want a published single-pass cutting chart, an infrared metal module in the box, or xTool’s cylinder range without a riser. Confirm the carton, because accessory bundles change.
- Laser
- 10W diode, 455 ± 15 nm
- Class
- Class 1 (FDA), as printed on the product page
- Work area
- 305 × 381 mm
- Spot
- 0.06 × 0.08 mm
- Weight
- 15.55 kg, from the spec block
- Software
- Falcon Design Space, LightBurn, LaserGRBL
Sources: Falcon A1 10W product page.
Pick 03
xTool M2 20W
Best for: The same Class 1 box, when 10W cutting will annoy you
$899. Black Friday price on xTool’s US store for the 20W standalone, inkjet not included. The page showed a compare-at price of $999. Price as of Nov 19, 2026; may change.
Buy the 20W module if you already know you will cut wood, not just engrave it. xTool’s FAQ table rates it for 10 mm basswood plywood and 8 mm black acrylic as maximums, with recommended single-pass settings of 15 mm/s for 3 mm basswood and 3 mm/s for 10 mm basswood, all at 100% power. The 10W module needs two passes for 3 mm black acrylic; the 20W module’s chart shows one. That is the whole upgrade.
It is the same enclosure, the same interlocks, and the same “not clear acrylic” limit. If the extra $400 over the 10W sale price is painful, start at 10W. The modules are sold as M2 modules, and the FAQ says they are not compatible with other xTool machines, so this is not a universal upgrade path for a Falcon.
Pros
- Same Class 1 chassis and the same 426 × 320 mm area as the 10W module.
- xTool’s chart rates the 20W module for 10 mm basswood in one pass and 3 mm black acrylic in one pass.
- You can stay on this machine if you later add the 3W infrared module for metal marks.
Cons
- xTool’s FAQ lists a larger spot for the 20W module (0.08 × 0.06 mm) than for the 10W module (0.06 × 0.04 mm), so fine detail is not automatically better.
- Still a blue diode: clear acrylic and mirror stainless are the wrong materials.
- The 40W module is $1,299 with no compare-at discount when we looked, and it shrinks the bed slightly to 426 × 312 mm.
Who it is not for
A first project that is only coasters and cards. You pay about $400 more than the 10W sale price and still cannot cut clear acrylic.
- Laser
- 20W diode, 445 nm ± 15 nm
- Class
- Class 1
- Work area
- 426 × 320 mm
- Cut claim
- 10 mm basswood; 8 mm black acrylic max, 3 mm in one pass
- Spot
- 0.08 × 0.06 mm
- Power adapter
- 25V 6A, per the FAQ
Sources: xTool M2 product page; xTool M2 FAQ, cutting table.
Pick 04
Creality Falcon A1 Pro 20W
Best for: A camera-focused 20W Class 1 diode, if you accept a smaller bed
$899. Creality Falcon’s US store listed the 20W Basic Kit at $899, with a compare-at price of $1,168. The separate Dual Laser Kit, which is the one to look at if you want the 2W infrared module, was $1,009 against a compare-at of $1,548. Price as of Nov 19, 2026; may change.
The A1 Pro is the Creality machine with the camera workflow and the thicker-cut marketing. The product spec block lists Class 1 (FDA), 455 ± 5 nm, a 268 × 358 mm area, and a 567 × 468 × 211 mm body. The English FAQ is more useful than the ad copy: the standard laser is a 20W blue semiconductor, the 2W infrared module is optional, transparent acrylic cannot be cut with the blue source, and painted metal is a blue-laser job while stainless is an infrared job.
We priced the Basic Kit at $899 and the Dual Laser Kit at $1,009 on Creality Falcon’s store. The FAQ’s wording (“optional accessory”) is why this pick links to the basic kit and tells you to switch listings if metal marks are the point. For a beginner who only wants wood and leather, the basic kit matches the M2 20W on price and loses on bed size. Choose it if the touchscreen, the camera autofocus, and LightBurn matter more than a 426 mm axis.
Pros
- Creality lists it as Class 1 (FDA), with a lid stop, flame detection, and a camera used for autofocus.
- The wiki gives a real material split: the blue laser does not cut transparent acrylic; the optional 1064 nm module is for metal engraving.
- LightBurn, LaserGRBL, and Falcon Design Space are all named in the FAQ.
Cons
- Work area is 358 × 268 mm, smaller than both the M2 and the Falcon A1 10W.
- The basic-kit price and the dual-laser-kit price are different products. Do not assume infrared is in the box.
- Creality still recommends goggles in the FAQ even though the lid is supposed to stop the beam.
Who it is not for
Long signs, clear acrylic, or anyone who assumes the $899 basic kit includes the infrared metal module. The wiki calls that module optional.
- Laser
- 20W diode, 455 ± 5 nm; 2W 1064 nm IR is optional
- Class
- Class 1 (FDA) with covers on
- Work area
- 358 × 268 mm
- Size
- 567 × 468 × 211 mm; 16.8 kg
- Claimed cuts
- Page marketing: 10 mm basswood, 8 mm black acrylic
- Software
- Falcon Design Space, LightBurn, LaserGRBL
Sources: Falcon A1 Pro basic kit; Falcon A1 Pro dual-laser kit; Falcon A1 Pro FAQ; Falcon A1 Pro safety instruction.
Safety rules that apply to every beginner machine
Laser class describes the light you can be exposed to, not the smoke and not the fire. OSHA’s laser hazards page is the short official overview of why beams are regulated. xTool’s class explanation on the M2 FAQ is the practical version: Class 1 is the low end of the scale, and Class 4 beams can injure eyes and skin from a direct or reflected beam and can start a fire.
Enclosed Class 1 machines in this list are safe from the beam only while you use them the way the manual says. Creality’s A1 Pro safety page says the product is a Class 1 consumer laser, tells you not to run it with parts removed or the cover open, and says that if you ever do operate with the cover open you need goggles matched to the wavelength. Sunglasses and prescription glasses are not those goggles. xTool’s goggle chart says goggles are not required for Class 1 products such as the M2 during normal use. The moment you defeat an interlock, you are in a different regime.
Open-frame diode machines, the kind sold as a gantry on open rails, are Class 4. Everyone in the room needs eyewear rated for that wavelength, with an optical density (OD) number for that wavelength, not a dark lens from a hardware drawer. xTool’s chart for its open and Class 4 diodes calls for OD6+ at about 455 nm. A pair bought for a blue diode does nothing useful for a CO2 laser at 10.6 μm, and a CO2 pair does not cover a 1064 nm fiber. Match the wavelength printed on the glasses to the wavelength printed on the machine.
- Never engrave or cut PVC, vinyl, or unknown pleather. xTool’s M2 FAQ says PVC vinyl produces toxic, corrosive chloride gases that harm people and the machine. The F2 materials FAQ says to avoid PVC and other chlorinated polymers because they release toxic chlorine gas. OMTech’s Pronto materials guide says that machine cannot be used with chlorine, including PVC and vinyl, or with fluorine plastics such as PTFE, because of toxic fumes. That includes a lot of sticker vinyl and some fake leather.
- Use air assist and real ventilation. Creality’s A1 Pro FAQ recommends air assist to keep the lens clean and the cut cooler, and strongly recommends a purifier because wood and acrylic release irritating gases. A charcoal sticker on the lid is not a plan.
- Never leave a running laser unattended. xTool’s D1 safety guide says so directly. Creality’s flame-detection FAQ says the sensor can false-alarm near a bright window, and that you still have to watch the job whether the sensor is on or off. Keep an extinguisher near the bench. Creality’s safety page asks for one.
- Do not cut stacked sheets, and do not store solvents in the same room. Fires start in the piece, then in the scrap underneath it.
What we left off, and why
xTool S1: on November 19, 2026 the old US product URL redirected to the xTool homepage, and the product JSON was a 404. We will not recommend a machine we cannot price.
Open-frame diodes such as the Falcon2 22W: the store listing we opened did not state a laser class next to a work area in a way we were willing to cite, and the marketing line about cutting stainless is the sort of claim a blue diode usually cannot back up. If you buy any open gantry, treat it as Class 4. Glasses for the wavelength, a room without kids or pets, a vent, and a person watching the job are the minimum. They are a poor first machine for an apartment.
Glowforge Aura and similar 6W cloud cutters: we did not lock a current configuration and price, so it is not a pick. A 6W diode also will not cut clear acrylic.
CO2 machines (xTool P2S and P3) and fiber or dual lasers (F1 Ultra, F2, ComMarker B4) are real beginner purchases only if you already know the material. They are on the small-business guide and the tumbler guide. A first-week gift maker does not need an 80W Class 1 CO2.
Questions people actually ask
What is the best laser engraver for a beginner at home?
An enclosed Class 1 diode, not an open frame. On November 19, 2026 the xTool M2 10W at $499 and the Creality Falcon A1 10W at $439 were the two machines we could verify as Class 1 with a published bed size in that price band. Pick the M2 if you want the published cutting chart and the longer bed. Pick the Falcon A1 if the lower price and LightBurn support matter more.
Is a Class 1 laser safe around kids and pets?
Class 1 means the light you can be exposed to during normal, interlocked use stays in the lowest class. It does not mean the smoke is safe, and it does not mean a wood fire is impossible. Keep children and pets out of the room while it runs, vent the fumes, and do not leave the job alone. Do not defeat the lid switch.
Do I need safety glasses for an enclosed beginner laser?
xTool says glasses are not required for Class 1 products such as the M2 during normal use. Creality’s A1 Pro FAQ still recommends goggles even with a lid that stops the laser. You do need wavelength-matched, OD-rated glasses if the lid is open, if you own an open-frame machine, or if the manual says the setup is Class 4. Ordinary sunglasses are not laser glasses.
Can a beginner diode laser cut clear acrylic?
No. Creality’s A1 Pro FAQ says the blue laser cannot cut transparent acrylic. xTool’s diode machines have the same limit. Clear acrylic is a CO2 job, which is a different machine, a different wavelength, and usually a Class 4 enclosure unless you step up to something like the xTool P3.
Can I engrave Yeti or Stanley tumblers with a first diode laser?
A blue diode can burn a design into many powder-coated cups if you have a rotary and the cup fits. It does not mark bare stainless well, because that metal reflects 455 nm light. Bare steel wants 1064 nm, from a fiber laser or an infrared module. Rotaries are usually sold separately. Read the tumbler guide before you buy a machine for cups.
What materials should I never put in a laser engraver?
Never run PVC or vinyl. Manufacturer safety pages say it releases toxic chlorine gas and corrodes the machine. That includes a lot of sticker vinyl and some vinyl leather. Also skip unknown plastics, PTFE or Teflon, and anything you cannot identify. Polycarbonate is on OMTech’s do-not-cut list. If two pages from the same brand disagree, follow the safety warning, not the cheerful materials grid.
Is 10W enough, or do I need 20W?
10W is enough to engrave and to cut thin wood slowly. xTool’s own chart shows the 20W M2 module cutting thicker basswood and cutting 3 mm black acrylic in one pass instead of two. If you mainly want coasters, ornaments, and cards, 10W is the sane start. If you already know you will cut 6 mm plywood often, the 20W module is the one that will not feel punishing.
Do I still need ventilation if the laser is enclosed?
Yes. Creality tells A1 Pro owners to use a purifier because wood and acrylic give off harmful gases and strong smells. The M2 has a fan, and xTool still sells purifiers and duct fans for it. Either duct outdoors or filter the exhaust. Do not vent into a closed bedroom.
Are the prices on this page the regular prices?
Not always. On November 19, 2026 xTool’s US store was running a Black Friday promotion. The M2 10W was $499 against a $599 compare-at price, and the 20W was $899 against $999. Creality’s Falcon A1 was $439 against $599, and the A1 Pro basic kit was $899 against $1,168, without a Black Friday label on those pages. Check the cart before you buy.
Keep reading
Hobby laser engravers
Diode, CO2, and fiber in one page, plus the safety rules that sit under every guide.
Best laser for tumblers
Which wavelength actually marks powder coat, and which one you need for bare stainless.
Best laser for a small business
When a Class 1 diode is enough to sell from, and when you are shopping a CO2 instead.