Hobby laser engravers
Best laser engraver for a small business
Match the machine to the product you can already describe. Wood and opaque acrylic can stay on a Class 1 diode. Clear acrylic wants CO2. Bare metal wants fiber.
Our picks at a glance
Ordered by the product line, not by price or by a test score. We have not produced orders on any of these.
| Machine | Best for | Class | Price checked | Price |
|---|---|---|---|---|
| xTool P2S 55W | Acrylic and wood products | Class 4 | $2,999 (was $4,499) | Check price at xTool |
| xTool F1 Ultra | Metal and gift personalization | Class 4 | $2,549 machine | Check price at xTool |
| xTool M2 20W | Class 1 home shop | Class 1 | $899 (was $999) | Check price at xTool |
| ComMarker B4 20W | Metal marks on a budget | Class 4 open | $1,299 machine | Check price at ComMarker |
| xTool P3 80W | Class 1 production CO2 | Class 1 | $6,599 | Check price at xTool |
How to choose a laser for a small shop
A laser does not make a business. It makes one family of products tolerable to repeat. Pick the family first, then the class rating you can actually live with.
Name the SKU
Ornaments, leather patches, and opaque signs can live on a Class 1 diode. Clear acrylic awards and thick wood cuts want a CO2. Names on bare steel, jewelry, and tumblers want 1064 nm. If you need all three on day one, you are buying two machines or the F1 Ultra and accepting its limits.
Where it will sit
xTool’s P2 and P2S LSO notes say not to use those Class 4 machines where untrained people or children are present, and that a riser is a Class 4 condition. A Class 1 diode or the P3’s Class 1 CO2 rating is the honest answer for a spare room. A garage with a lock and a vent is a different answer.
Exhaust is a cost
Budget a window duct or a purifier before the second machine. Creality’s FAQ treats a purifier as a health item for wood and acrylic, not an accessory. CO2 tubes are also a consumable. xTool’s older 55W P2 FAQ lists a glass-tube life around 6,000 to 8,000 hours. Confirm the current P2S figure before you model it as forever.
Small-business laser threads usually start with “I want to sell on Etsy” and a budget, and only later mention the product. The product changes the answer. A 20W enclosed diode will turn out wooden gift sets all year. It will embarrass you on clear acrylic menu signs. A fiber marker will finish a tray of steel tags before lunch and will not cut a birch ornament.
The five machines below are split that way. Prices are what the manufacturer stores showed on November 19, 2026. xTool was in a Black Friday promotion, so several of those prices are sale prices with a higher compare-at number still on the page. Nothing here is a hands-on shop test or a promise about profit.
Pick 01
xTool P2S 55W
Best for: A first CO2 for acrylic, wood, and glass products
$2,999. Black Friday price on xTool’s US store for the standalone P2S. The page showed a compare-at price of $4,499. Purifier, riser, and rotary are not included in that figure. Price as of Nov 19, 2026; may change.
This is the CO2 we would price first for a product line of acrylic awards, wood signs, and glass, if the room can take a Class 4 machine. The P2S page leads with a 55W tube, a 23.6 × 12 inch bed, and a claim of cutting 20 mm acrylic and 18 mm wood in one pass. That is the capability a diode, even a 40W diode, does not have: clear acrylic actually absorbs 10.6 μm.
Read the P2/P2S LSO training before the cart. xTool calls the P2S a Class 4 laser product. Without the riser, they say the enclosure creates Class 1 conditions and extra goggles are not required beyond the manual. With the riser, light can leak and the setup is Class 4: trained operators, a controlled area, and no children. The P2-series laser safety article tells you to wear goggles that block 10.6 μm when you are in that regime. The goggle chart lists OD5+ for the P2/P2S. xTool’s P3 comparison also notes that active fire suppression on the P2S is a separate kit. Supervision is not optional either way.
Pros
- 55W CO2 at 10.6 μm. The product page says it cuts 20 mm acrylic and 18 mm wood in one pass, which is the clear-acrylic reason to leave diodes behind.
- The bed xTool prints in the banner is 23.6 × 12 inches, in line with the 600 × 305 mm area on the P2-series spec tables.
- With the lid closed and no riser, xTool’s LSO note says the machine can be operated in Class 1 conditions. That is not the same sentence as “safe in a playroom.”
Cons
- It is a Class 4 product. Riser, passthrough, and open-lid work are Class 4 conditions and, in xTool’s words, not for places where untrained people or children are around.
- No fiber. Metal marking is a coating or a spray, not a clean stainless mark.
- The glass tube wears out. Budget service, a real exhaust path, and glasses rated for 10.6 μm if you ever run it as Class 4. Diode glasses are the wrong pair.
Who it is not for
A spare bedroom with children in the house, or a shop whose product is bare metal. xTool rates the P2S as a Class 4 laser. Bare stainless needs a different wavelength or a marking spray.
- Laser
- 55W CO2, 10.6 μm
- Class
- Class 4 product; Class 1 conditions only when fully enclosed, no riser
- Bed
- About 600 × 305 mm (23.6 × 12 in)
- Cut claim
- 20 mm acrylic and 18 mm wood, one pass, per the product page
- Glasses
- OD5+ at 10.6 μm for Class 4 use, per xTool’s chart
- Fire
- Fire-safety set is optional; do not skip watching the job
Sources: P2S product page; P2/P2S LSO training; P2-series laser safety; xTool goggle chart.
Pick 02
xTool F1 Ultra
Best for: A personalization shop: metal, coated cups, and small non-metal gifts
$2,549. Black Friday price for the standalone unit, against a $2,999 compare-at price. Add $269 for an RA2 Pro or $349 for an RA3 if tumblers are in the catalog. Goggles are not included. Price as of Nov 19, 2026; may change.
For a shop that engraves drinkware, pins, cards, and small gifts, the F1 Ultra is the single chassis that is not pretending. Fiber for the metal, diode for the wood and the coating, galvo for the speed. The limits and the Class 4 rules are written out on the tumbler guide, including the goggle wavelengths and the fact that the rotary is extra. Use that page if cups are most of the revenue.
Do not buy it as a “do everything” replacement for a CO2 bed. A 220 mm square field does not cut a stack of 12-inch signs. If the catalog is half acrylic panels and half tumblers, you are describing two machines. Starting with this one makes sense only when the metal work is what customers pay for.
Pros
- 20W fiber plus 20W diode covers bare metal and ordinary craft materials without swapping a gantry module.
- Galvo speed (xTool says up to 10,000 mm/s) is what makes batch tags and jewelry plausible.
- Thin-metal cutting is on xTool’s spec list, at fractions of a millimeter, which a diode cannot do.
Cons
- Class 4 by xTool’s own explanation. The lid is not a free pass.
- You still buy the rotary, the glasses (OD6+ at three wavelengths), and a purifier.
- Large signs and thick sheet cutting belong on the P2S or the P3, not here.
Who it is not for
Sheet-goods production. The field is 220 × 220 mm. It is also the wrong machine if you need a Class 1 rating for a classroom or a shared home.
- Lasers
- 20W fiber and 20W diode
- Class
- Class 4
- Field
- 220 × 220 mm
- Metal cut claim
- 0.3 mm stainless, 0.4 mm brass, 0.2 mm aluminum
- Rotary
- Sold separately
- Glasses
- OD6+; not in the box
Sources: F1 Ultra product page; F1 Ultra safety; F1 Ultra Q&A.
Pick 03
xTool M2 20W
Best for: A home business that must stay Class 1
$899. Black Friday price for the 20W standalone, inkjet not included, against a $999 compare-at price. The 40W standalone was $1,299 with no compare-at discount. Price as of Nov 19, 2026; may change.
If you are testing whether strangers will buy wooden gifts, do not start with a $3,000 CO2. The M2 20W is the Class 1 machine with a published cutting chart that is actually about cutting. Details, the 10W comparison, and the safety interlocks are on the beginner guide. The business reason to pick 20W over 10W is time: xTool’s single-pass numbers for thicker basswood and for 3 mm black acrylic are simply faster.
Keep the catalog inside what a blue diode can finish. Opaque acrylic, wood, leather, card, and coated metal. The day a customer asks for a clear acrylic seating chart, this machine is the wrong one and you will know it was the right first purchase anyway, because you learned that with $899 instead of with a Class 4 tube.
Pros
- Class 1 with interlocks, which is the rating that belongs in a house.
- xTool’s chart gives the 20W module 10 mm basswood and single-pass 3 mm black acrylic.
- Flat area is 426 × 320 mm, and coated cylinders to 100 mm do not need a riser if you add the RA3 Lite.
Cons
- No clear acrylic, no honest bare-stainless mark unless you buy the 3W infrared module.
- A gantry at 600 mm/s will not keep up with a galvo once orders are a tray at a time.
- The color inkjet is a separate module, so the “print and cut shop” version is not the $899 price.
Who it is not for
Clear acrylic product lines, bare-metal tagging, or anyone who needs a 24-inch sheet. You will outgrow it if those are the orders.
- Laser
- 20W diode, 445 nm ± 15 nm
- Class
- Class 1
- Work area
- 426 × 320 mm
- Cut chart
- 10 mm basswood; 3 mm black acrylic in one pass
- Metal
- Optional 3W, 1064 nm module, not included
- Software
- xTool Studio
Sources: xTool M2 product page; xTool M2 FAQ.
Pick 04
ComMarker B4 20W
Best for: A metal-only bench: tags, jewelry, tools, bare tumblers
$1,299. 110V, 20W, without a rotary, listed at $1,299 against a compare-at price of $1,999. With a D69 or D80 rotary the same store listed $1,466 against $2,221. Not labeled as a Black Friday price on the page we checked. Price as of Nov 19, 2026; may change.
A metal-marking business does not need a diode at all. The B4 is the lower-priced 20W fiber we could verify, with the safety language in the manual instead of in a slogan: Class IV, goggles, do not leave it running alone. Use the tumbler page if the rotary bundle is the actual purchase.
The trade against the F1 Ultra is the enclosure and the second laser. You save money and you take on an open beam. That is a reasonable shop decision behind a closed door. It is a bad decision on a craft-fair table with a crowd, unless you have a real barrier and the right glasses on every person who can see the work.
Pros
- 1064 nm at 20W is the right tool for stainless marks, at a lower machine price than the F1 Ultra.
- Two field lenses, 110 mm and 200 mm, are listed in the manual.
- LightBurn and EZCAD are both named on the product page, which matters if you already know one of them.
Cons
- The manual says Class IV lasers, goggles, and no unattended use. There is no interlocked Class 1 shell.
- No diode. Coated cups work, wood ornaments do not, not as a cutting product.
- You must pick 110V versus 220V yourself. The wrong voltage is a dead machine.
Who it is not for
Any room you cannot control, and any catalog that includes wood cutting. Open Class IV fiber, full stop.
- Laser
- 20W fiber, 1064 nm
- Class
- Class IV per the user manual
- Lenses
- 110 × 110 mm and 200 × 200 mm
- Rotary
- Optional, $1,466 bundle when we looked
- Weight
- About 11 kg for the 20W, per the manual
- Software
- EZCAD and LightBurn
Sources: ComMarker B4 store page; B4 user manual.
Pick 05
xTool P3 80W
Best for: A busy acrylic and wood shop that wants an 80W CO2 xTool rates Class 1
$6,599. xTool’s US store listed the P3 standalone at $6,599 with no lower compare-at price. The versatile bundle was $7,809 and the all-in-one bundle was $10,059. Rotary, conveyor, and the 5W infrared module are extra unless the bundle says otherwise. Price as of Nov 19, 2026; may change.
The P3 is here for the shop that already has orders and wants clear acrylic without living in Class 4 rules. xTool’s P3 page calls the safety rating Class 1, lists a 36 × 18 inch bed, and contrasts it with the P2S, which they call Class 4. The same page says fire suppression is built in, while the P2S version is a paid kit. The goggle chart groups the P3 with Class 1 machines that do not need glasses in normal operation. That is the difference you are paying for, along with wattage and bed size.
It does not erase the other rules. Acrylic and wood still need a duct or a purifier. The beam can still ignite a sheet if focus, air, or a warped board goes wrong. xTool’s own stories on the product page are marketing, not our results, and we are not repeating their revenue claims. If you are still guessing at the product, buy the M2 or the P2S first and let the orders pick the P3.
Pros
- xTool rates it Class 1, unlike the P2S, and the goggle article lists the P3 with machines that do not need glasses in normal use.
- Working area is 36 × 18 inches (915 × 458 mm), which xTool says is about 2.3 times the P2S.
- The product page claims 20 mm basswood and 25 mm acrylic, and it includes fire suppression that the P2S charges extra for.
Cons
- The price is a real business purchase. A slow shop will not “save” its way here.
- CO2 still does not replace a fiber for bare stainless. The infrared module is optional.
- It is large, it still needs exhaust, and a Class 1 rating still does not let you leave a cutting job alone.
Who it is not for
A first test of whether a shop will make money. Also not the bare-metal machine, unless you add the separate infrared module and accept what 5W can and cannot do.
- Laser
- 80W CO2; optional 5W IR is separate
- Class
- Class 1, per xTool
- Bed
- 915 × 458 mm (36 × 18 in)
- Cut claim
- 20 mm basswood and 25 mm acrylic, per the product page
- Fire
- Built-in CO2 fire suppression, per xTool’s comparison
- Pass-through
- Optional conveyor for longer stock
Sources: xTool P3 product page; P3 marketing page, class comparison; xTool goggle chart.
Shop safety is part of the cost
A business laser gets used more, by more tired people, around more scrap. The class rules do not relax because you have an order due. OSHA’s laser hazards overview is the short version of why a reflected beam is still a beam. xTool’s P2S documents say a Class 4 machine needs a laser safety officer in a workplace and does not belong around untrained people or children. ComMarker’s manual says Class IV, goggles, and no unattended running. Class 1 machines (M2, P3, and the Falcon boxes on the beginner page) keep that rating only while interlocks and covers stay in place.
Glasses have to match the wavelength and carry an OD rating for it. CO2 eyewear for 10.6 μm does not protect you from a 455 nm diode or a 1064 nm fiber, and the reverse is also true. xTool’s chart is the clearest public table we found: OD5+ for the P2/P2S in Class 4 use, OD6+ for the F1 Ultra and F2 Ultra. Buy the pair for the machine you own, not a generic “laser glasses” listing with no wavelength.
Fumes and fire scale with hours. Do not cut PVC, vinyl, or unknown pleather; chlorine gas is the reason, repeated on xTool’s M2 FAQ, the F2 materials FAQ, and OMTech’s Pronto materials guide. Use air assist. Duct outdoors or run a real filter. Keep an extinguisher at the machine. Flame detection and the P3’s suppression system are backups, not a substitute for a person in the room. Creality’s A1 Pro FAQ says to watch the job even when flame detection is switched on, because the sensor can also false-alarm.
What we left off, and why
xTool F2 Ultra: $4,299 for the 60W MOPA-only standalone and $5,299 for the 60W MOPA plus 40W diode, with no compare-at cut on those two. The goggle chart calls it a Class 4 model and asks for OD6+ at 1064 nm, 655 nm, and 445 nm. Buy it when color marks on stainless and deeper metal engraving are the product, not when you are still choosing between wood and cups. The product page is the place to confirm the current bundle.
xTool S1: no live US product price on November 19, 2026. The old URL redirected to the store homepage.
Glowforge and OMTech CO2 desktops: both brands sell enclosed CO2 machines people use for small shops. We did not lock a current US configuration, tube class, and price in the same pass, so neither is a pick. OMTech’s Pronto materials guide is still a source for the PVC rule above.
A heat press, a printer, and a vinyl cutter are different businesses. A laser will not sublimate a polyester shirt. If the catalog is shirts, this is the wrong guide.
Questions people actually ask
What laser should I buy for a small business at home?
If the products are wood, leather, and opaque acrylic, a Class 1 diode such as the xTool M2 20W is the machine that matches the room. If the products are clear acrylic, you need a CO2, and the usual desktop CO2 (the P2S) is a Class 4 machine that xTool does not want around children. The P3 is the Class 1 CO2, at $6,599.
Can one laser do tumblers and wood signs?
Not well. Signs want bed size and, if the acrylic is clear, a CO2. Tumblers want a rotary and, if the steel is bare, 1064 nm. The F1 Ultra covers metal and small non-metal gifts. It does not cut large signs. Most mixed shops end up with two machines. Start with the one that matches the product you can sell first.
Is the xTool P2S safe to run in a house?
xTool calls it a Class 4 laser product. They say that without a riser, normal closed-lid use can meet Class 1 conditions. They also say not to use it where untrained people or children are present when you are in Class 4 conditions, which includes the riser. You still need exhaust, air assist, and someone watching for fire. A Class 1 diode is the easier fit for a spare room.
Do I need an air purifier or a window vent?
You need the fumes out of the room you breathe. A duct out a window is the simple version. A purifier is the version for a room with no usable window, and filters are a repeating cost. Creality’s A1 Pro FAQ treats purification as necessary for wood and acrylic. Enclosure class does not filter chlorine, and you should not be generating chlorine in the first place.
What does a CO2 tube replacement cost?
We do not have a current tube price we are willing to print. xTool’s pre-sales FAQ for the earlier 55W P2 lists a glass-tube lifespan of about 6,000 to 8,000 hours. The P2S is also a 55W CO2, but you should confirm the tube life and the replacement price on the current parts page before you put a number in a spreadsheet.
Is the P3 worth the jump from the P2S?
Only if you need the larger 36 by 18 inch bed, the extra wattage, the built-in fire suppression, and a Class 1 rating enough to justify $6,599 against a $2,999 sale price on the P2S. If you are still proving the product, the P2S or a Class 1 diode will teach you more per dollar. The P3 does not mark bare metal by itself.
Are these Black Friday prices the ones I will pay in December?
Maybe not. On November 19, 2026 xTool showed Black Friday pricing: P2S at $2,999 against $4,499, F1 Ultra at $2,549 against $2,999, and M2 20W at $899 against $999. The P3 was $6,599 with no cut. ComMarker’s B4 was $1,299 against a $1,999 compare-at price without a Black Friday label. Check the cart. Sale prices move.
Can I engrave PVC products if the customer asks?
No. PVC and vinyl release toxic chlorine gas and can corrode the optics and the mechanics. Several manufacturer safety pages forbid it. Decline the job. The same answer covers unknown fake leather and a lot of craft vinyl.
Keep reading
Best for beginners
The Class 1 diodes, including the cheaper 10W machines, if the business is still a hypothesis.
Best for tumblers
Rotary prices, coated versus bare stainless, and why a lid does not always mean Class 1.
Hobby laser engravers
The short map of wavelengths and classes behind these picks.